The Orac Decor Luxxus C357 indirect lighting / uplighting coving cornice features a neat linear profile with a shadow edge that projects 11cm into the room, and has a 7.1cm depth. The shallow trough section pushes light upwards to reflect off the ceiling.
For a quote to include our LED lighting, email firstname.lastname@example.org or phone 01883 627064.
Inspiration and adhesives, see below.
Orac Orac Decor C357 indirect lighting / uplighting coving cornice can be used for fluorescent or LED lighting. We would recommend installing 15-20cm from the ceiling to allow access to the lighting units and for light projection onto the ceiling.
If heavier fluorescent lighting is installed you may need a mechanical fixing into the wall to add support. The C357 indirect lighting / uplighting coving cornice is easy to install needing only general DIY skills. The indirect lighting / uplighting coving cornice is supplied with a primer coat of paint to speed finishing, so once installed only a top coat of paint is required. Consider an additional coving which can be added above to add design and reflect the light.
C357 indirect lighting / uplighting coving cornice samples can be ordered below in the related products section.
Install using the correct adhesives. The jointing FX is particularly important as the leading edge will not be supported from the ceiling and fusing the joints avoids light creep.
7.1cm high x 11cm deep x 200cm long.
Made from Light weight resilient polyurethane.
Technical drawing PDF
Coving installation guide