CX.111 Wells Coving
CX 111 is a small coving that adds distinctive character to a room, packing in a lot of shape for a small product. This coving is ideally suited to smaller rooms or confined spaces. Sharp details, easy installation, lightweight, non fragile coving, already primed and easy to paint.
Product: CX111 Coving
Dimensions: 2.5cm high x 1.5cm deep x 200cm long
Material: Light weight resilient man-made Duropolymer®
Price: £4.39 including VAT
The diminutive 15 x 25mm CX.111 coving section is especially suitable to modern homes with minimal 8 foot 6 inch ceiling height. The enthusiastic DIYer will find working with our Duropolymer material very similar to working with soft wood alternatives. The only tools required for installation is a good stiff saw, cartridge gun for the adhesive, and a small paint brush. On a small moulding like this one neat bead of FDP500 will allow a strong installation to a prepared wall, and if the installation is done in warm conditions finishing may be possible within 6 hours (always test a small area first for peace of mind). You may wish to use a mitre box on corners, but any small errors can easily be rectified by using our adhesive as a filler. Remember to use FDP500 in most rooms, and FDP700 in humid or wet areas such as bathrooms. The CX111 can be used in very tight spaces such as old cottages, especially upstairs where larger moulding may look clumsy. Where ceiling heights are higher choose the similar CX112 coving moulding listed separately. Ideal for bedroom coving and bathroom coving.
Request a sample of CX111 Coving either by 'phone or by clicking here to add the sample to your shopping trolley. Samples are £0.99 each, P&P £4.00. Brochure included.
StumbleUpon
Digg
Furl
Del.icio.us
Yahoo! MyWeb
BlinkList
We recommend the following Coving Adhesives and Tools:
Adhesives For Standard Applications...
Product: FDP500 DecoFix Pro 310ml cartridge
Price: £5.14 including VAT
Coverage: Up to 8 metres (approx. 4 lengths of coving).
Usage: For interior use as an adhesive or filler. Use this adhesive to attach coving and panel mouldings to the wall or ceiling. New build installations or any rooms where ceilings or walls have recently been re-plastered please select our stronger FDP700 Hydro to ensure good adhesion.
and...
Product: FX200 Orac Fix Extra 310ml cartridge
Price: £16.31 including VAT
Coverage: Up to 150 metres of coving.
Usage: For interior or exterior use to join components together. Remove excess with acetone before hardening, or with a sharp knife after hardening.
or...
Product: FX210 Orac Fix Extra 80ml tube
Price: £7.37 including VAT
Coverage: Up to 40 metres of coving.
Usage: For interior or exterior use to join components together. Remove excess with acetone before hardening, or with a sharp knife after hardening.
Recommended Tools for this Product...
Product: FB13 Mitre Box
Price: £30.28 including VAT
Product Detail:
FB13 user guide
Summary: Specialist mitre box for products up to 12.5 cm deep x 15.5cm projection.
and...
Product: FB14 Saw
Price: £30.28 including VAT
Summary: Cross-cut, medium tooth saw, purpose designed.
and...
Product: FDP100 Cartridge Gun
Price: £7.37 including VAT
Summary: For use with FDP500, FDP700 and FX200 adhesives.
Adhesives For Humid or Exterior Applications...
Product: FDP700 DecoFix Hydro 290ml cartridge
Price: £11.48 including VAT
Coverage: Up to 8 metres of coving.
Usage: For use as an adhesive or filler in humid (e.g. bathrooms) or exterior applications. Remove excess with soapy water before hardening.
and...
Product: FX200 Orac Fix Extra 310ml cartridge
Price: £16.31 including VAT
Coverage: Up to 150 metres of coving.
Usage: For interior or exterior use to join components together. Remove excess with acetone before hardening, or with a sharp knife after hardening.
or...
Product: FX210 Orac Fix Extra 80ml tube
Price: £7.37 including VAT
Coverage: Up to 40 metres of coving.
Usage: For interior or exterior use to join components together. Remove excess with acetone before hardening, or with a sharp knife after hardening.
Orac CX111 cornice or coving is a House Martin Interiors Orac cornice. Supplied in 2m lengths this cornice profile measures 2.5 x 1.5cm with a 2.9cm diagonal. This is a small cornice, ideal for confined spaces and small rooms. A detailed cornice, this design is suitable for a range of small room styles. The CX111 concave cornice has a convex turn at the top, line detailing in the centre and a straight finish at the base.
Lower and standard ceiling height is the normal use for this cornice. Higher ceilings would usually require bigger cornice because of the viewing distance. Produced as cornice for a smaller room such as; bathroom cornice, hall cornice, bedroom cornice, box room cornice, study cornice and kitchen cornice.
A range of complimentary mouldings can be used with the CX111 cornice. Consider SX125 skirting board, SX105 skirting board, SX155 skirting board, PX116 dado panel moulding, PX117 dado panel moulding and PX144 dado panel moulding.
You may be interested in the following Coving Information:
Rigid moulding installation guide
Flexible moulding installation guide, including minimum bend radius information
Main Coving product page
Lincrusta
