KI.5H Ionic Half Column

The Orac Luxxus KI5H column creates stylish architectural feature suited to the entrance of many detached properties. The fluted shaft has is 10" wide and rests on a semi-circular plinth. Each KI5H comes with an elaborate decorative capital, based upon the classical Greek ram's horn design. This slim design can be particularly attractive when installed against walls in luxurious bathrooms.

Product: KI5H Ionic Half Column

Maximum Height: 2.245 metres

Components: K1141 Slim Ionic Half Capital, K1001 Slim Fluted Half Shaft, K1151 Small Round Half Plinth

Material: High density, rigid polyurethane.

Price: £252.37 including VAT

useful column information This product is available in full column format as KI5.

Every Orac KI5H column is produced in a lightweight easy to install polyurethane. Each component has a coat of undercoat applied in the factory, and once installed will require one coat to finish. Unlike porous plaster and gypsum columns our pillars are non porous and easy to finish.

If the overall height of 2245 mm is too high adjustment can be made by trimming the column shaft before installing. Simply mark the surface with a pencil line, and saw off any excess material. Every column comes with a fitting guide, but we recommend buyers to select FDP700 for exterior and humid (bathroom) conditions, or FDP500 for standard interior applications. Either of these adhesives will allow installation to a floor or ceiling. Join components together with FX200 Extra Fix, wiping off residue as you go.

House Martin supply columns from Cornwall to Lancashire. So wherever you are order today, and our carriers will typically deliver within 6 working days.

StumbleUpon Digg Furl Del.icio.us Yahoo! MyWeb BlinkList

We recommend the following Column Adhesives:

For Standard Applications...

Product: FDP500 DecoFix Pro 310ml cartridge

Price: £4.89 including VAT

Coverage: 2 complete columns

Usage: For interior use as an adhesive or filler. Use this adhesive to attach column to the wall and ceiling. Remove excess with water before hardening.

and...

Product: FX200 Orac Fix Extra 310ml cartridge

Price: £15.50 including VAT

Coverage: 2 complete columns

Usage: For interior or exterior use to join components together. Remove excess with acetone before hardening, or with a sharp knife after hardening.

For Humid or Exterior Applications...

Product: FDP700 DecoFix Hydro 290ml cartridge

Price: £11.24 including VAT

Coverage: 2 complete columns

Usage: For use as an adhesive or filler in humid (e.g. bathrooms) or exterior applications. Remove excess with soapy water before hardening.

and...

Product: FX200 Orac Fix Extra 310ml cartridge

Price: £13.73 including VAT

Coverage: 2 complete columns

Usage: For interior or exterior use to join components together. Remove excess with acetone before hardening, or with a sharp knife after hardening.