KD.3H Doric Half Column
The Orac Luxxus KD3H Doric column is designed to add grandeur to larger properties. The substantial 30 cm (12 inch) diameter plain column shaft sits on a semi-circular plinth, and features a discrete Doric capital. Each KD3H column can be used for exterior or interior applications. The column features a 10mm thick polyurethane shaft, which can be trimmed for applications of less than 2345 mm.
Product: KD3H Doric Half Column
Maximum Height: 2.345 metres
Components: K3111 Wide Doric Half Capital, K3101 Wide Plain Half Shaft, K2131 Large Round Half Plinth
Material: High density, rigid polyurethane.
Price: £302.62 including VAT
This product is available in full column format as KD3.
Choose a pair of Orac Luxxus KD3H half pillars for installations where a full column is required, but access from above precludes installation of a full column. The beauty of full columns can be created by using extra fix adhesive to join the half sections together and create a full 360 degree column installation. You may think this difficult, but in comparison to joining flimsy GRP columns it is actually quite straight forward. Each plinth will need to be fixed to installed on a bed of FDP500 (for interior applications) or FDP700 for exterior or humid applications. Then simply join components with Extra Fix, and seal the top of the capital with FDP500 (or FDP700 for exterior/humid applications). Any external installations of paired half columns going under canopies will require structural steel support, or tanalised timber to bear any loading from above. It is possible to infill KD3 and KD3H columns with concrete, but we recommend this process is done over three days to obtain the best results. Please call House Martin on 0845 519 1987 if you have any queries.
StumbleUpon
Digg
Furl
Del.icio.us
Yahoo! MyWeb
BlinkList
We recommend the following Column Adhesives:
For Standard Applications...
Product: FDP500 DecoFix Pro 310ml cartridge
Price: £5.14 including VAT
Coverage: 2 complete columns
Usage: For interior use as an adhesive or filler. Use this adhesive to attach column to the wall and ceiling. Remove excess with water before hardening.
and...
Product: FX200 Orac Fix Extra 310ml cartridge
Price: £16.31 including VAT
Coverage: 2 complete columns
Usage: For interior or exterior use to join components together. Remove excess with acetone before hardening, or with a sharp knife after hardening.
For Humid or Exterior Applications...
Product: FDP700 DecoFix Hydro 290ml cartridge
Price: £11.48 including VAT
Coverage: 2 complete columns
Usage: For use as an adhesive or filler in humid (e.g. bathrooms) or exterior applications. Remove excess with soapy water before hardening.
and...
Product: FX200 Orac Fix Extra 310ml cartridge
Price: £13.73 including VAT
Coverage: 2 complete columns
Usage: For interior or exterior use to join components together. Remove excess with acetone before hardening, or with a sharp knife after hardening.
Product: FDP100 Cartridge Gun
Price: £7.37 including VAT
Summary: For use with FDP500, FDP700 and FX200 adhesives.
You may be interested in the following Column Information:
Interior full column installation guide
Interior half column installation guide
Exterior full column installation guide
Column Selector Guide page
Lincrusta
